NEWS

New test Socketless on .8mm Centers.
QA is pleased to expand on our X Probe Socketless products with our new X31-25 Series PDF. PDF

New Socket Plugs
A quick and easy solution to plug conventional socket where a test point is no longer needed. PDF

The Cutting Edge of Technology
The 9R Razor is now available in our 50mil, .250" travel series probes. This 9R Razor is designed to contact solder domes and test pads on 50mil centers. PDF

QA's new integraMate® ICS70 Series are designed to accept Ø0.7mm mating pins and used on .070" center spacing. PDF

	X50-25 Series ~ .050 (1.27) Centers, .250 (6.35) Stroke Overview Tip Styles Wire Jacks Wire Grips Wired Terminations Wireless Terminations Tools PDF CAD       Termination Extraction Tools   Order the ET-X50 for removing a damaged termination from its mounting hole when the Probe and optional Spacer Plates are removed. Order the ET-X50-EXT for removing a damaged trermination from its mounting hole when the Probe and optional Spacer Plates are installed.           Termination Insertion Tools   Order the IT-X50-FLUSH or IT-X50 SET .XXX (000/.140 [0.00/3.56]) tools to install X50-25/40 termination.           Pin Gauge Tools   Mounting holes in AT7000, G10/FR4 or similar materials for the Probe Plate should be gauged at .042/.043 [1.066/1.092] diameter using PG-X50-P pin gauge. Mounting holes in AT7000, G10/FR4 or similar materals for Back Plate (wired and wireless) should be gauged at .038/.039 [0.965/0.990] diameter using PG-X50-T pin gauge.           Probe Installation Tools   Use PT50/39 to install X50-25 or X50-40 probes.           Wire Jack Installation Tools   Order the JT2830 to install the WJ2830, WJ28Cxxxx or WJ30Cxxxx wire jacks           X Probe Extraction Tool   Order the PEX50 for removing damaged X Probe tubes without damaging the fixture.           Indicator Probes   Use IPX50-2540 to measure probe stroke in a test fixture (plunger remains at deflected position). All specifications subject to change without notice. All dimensions are in inches [mm]. All spring forces in ounces [gms].