NEWS

QA Technology Company is pleased to announce the release of our 2012 Catalog. Click here to request a catalog.

(View as a PDF)

New test Socketless on .8mm Centers.
QA is pleased to expand on our X Probe Socketless products with our new X31-25 Series PDF. PDF

QA's new integraMate® ICS70 Series are designed to accept Ø0.7mm mating pins and used on .070" center spacing. PDF

	X75-40 Series ~ .075 (1.91) Centers, .400 (10.16) Stroke Overview Tip Styles Wired Terminations Wireless Terminations Tools PDF CAD           Termination Extraction Tools   Order the ET-X75A for removing a damaged termination from its mounting hole when the Probe and Optional Spacer Plates are removed. Order the ET-X75A-EXT for removing a damaged termination from its mounting hole when the Probe and optional Spacer Plates are installed.           Termination Insertion Tools   Order the IT-X75A-FLUSH or IT-X75A SET .XXX (.000/.140 [0.00/3.56]) tools to install X75-25/40 terminations.           Pin Gauge Tools   Mounting holes in AT7000, G10/FR4 or similar materials for the Probe Plate should be gauged at .0545/.0555 [1.384/1.409] diameter using PG-X75A-P pin gauge. Mouning holes in AT7000, G10/FR4 or similar materials for the Back Plate (wired) should be gauged at .0515/.0525 [1.308/1.333] diameter using PG-X75A-T pin gauge. Mounting holes in AT7000, G10/FR4 or similar materials for the Back Plate (wireless) should be gauged at .038/.039 [0.965/0.990] diameter using PG-X50T pin gauge.           Probe Installation Tools   Use PT100/75 to install X75-25 or X75-40 probes.           X Probe Extraction Tool   Order the PEX75 for removing damaged X Probe tubes without damaging the fixture.           Indicator Probes   Use IPX75-4010 or IPX75-4040 to measure probe stroke in a test fixture (plunger remains at deflected position). All specifications subject to change without notice. All dimensions are in inches [mm]. All spring forces in ounces [gms].